Thinking about new countertops? One of the fastest ways to get a quote that actually means something is to walk in or call with a rough drawing of your countertops. You don’t need to be exact — you just need to be close enough that we can hand you a real number instead of a vague range. The good news: measuring your own kitchen takes about ten minutes and a tape measure. Here’s how homeowners across Phoenix, the East Valley, and the rest of Arizona can do it.
Why a Rough Measurement Helps
A basic drawing lets us price your project accurately on your first contact instead of guessing. It also helps you compare options — granite vs. quartz vs. quartzite — with real numbers in front of you. And don’t stress about precision: every Granite Karma project ends with a professional digital template that captures the exact measurements before a single slab is cut. This step is just to get you a fast, honest ballpark.
What You’ll Need
- A tape measure (a 25-foot one is plenty)
- A piece of paper or the notes app on your phone
- About two minutes to sketch your layout
No special tools, no math degree.
Step 1 — Sketch Your Layout
Draw a simple top-down outline of your counters, like a bird’s-eye view. Include every run: the stretch by the stove, the L-shape in the corner, the island, the bar. It doesn’t have to be pretty — you’re just making sure you don’t forget a section.
Step 2 — Measure Each Section
For every run of counter, measure two things in inches:
- Length — end to end
- Depth — front edge to the wall (most counters run about 25–26 inches deep, but measure yours to be sure)
Jot the length and depth next to each section on your sketch. Measure your island separately — it usually has a different depth than your wall counters.
Just bring the drawing to our showroom and we will do the rest! if you don’t want to stop by our Chandler Showroom then you can either text or email the drawing to our main number or to info@granitekarma.com
A Few Things Not to Forget
- Sink and cooktop cutouts: don’t subtract them. We measure the full surface, and the cutouts are part of the work.
- Backsplash: if you want a stone backsplash, measure its height and length separately and note it.
- Overhangs: planning a bar overhang for seating? Add how many inches of overhang you would like in that particular piece.
What Happens After Your Ballpark
Once you’ve got a rough square footage, the rest is on us. Bring your numbers to a free in-home consultation and we’ll:
- Confirm everything with a precise digital template.
- Walk you through granite, quartz, quartzite, and Cambria options in person
- Give you a firm, no-pressure quote
We serve Phoenix, the East Valley — Chandler, Gilbert, Mesa, Scottsdale, Tempe — and homeowners across Arizona.
Book Your Free In-Home Consultation →
Frequently Asked Questions
Do I need exact measurements to get a quote?
No. A rough drawing is plenty for a ballpark. We finalize exact measurements with a free digital template before fabrication.
What’s the standard depth of a kitchen countertop?
Most run about 25–26 inches deep, including the overhang. Islands vary, so measure yours.
Should I subtract the sink or stove cutouts?
No — measure the full surface. Cutouts are part of the fabrication.
How do I measure an L-shaped counter?
Break it into two rectangles, measure each, and add them together.
Do you include the backsplash in the quote?
We can. If you want a stone backsplash, measure its length and height separately and let us know.
How accurate does my sketch need to be?
Not very. It’s just a reference so you don’t miss a section — we bring the precision later.
What if I’d rather skip the measuring?
Totally fine. Book a free in-home consultation and we’ll measure everything for you.
Ready for a Real Number?
Grab your tape measure, jot down your drawing, and book a free in-home consultation. We’ll bring the expertise, the slabs, and the precise measurements — you just bring the kitchen.